Some tips of waterproof roof
Waterproofing roofs and get an efficient and lasting result should bear in mind the following concepts:

  • Ensure that the surfaces are firm, dry, clean and smooth.
  • Check that the cover has the inclination or proper slope.
  • Make sure the drains are necessary to allow proper drainage, which may well drain all the water fall in torrential rain.
  • When placing asphalt membranes, should be performed primer prior entire surface before waterproofing roofs, to allow better adhesion of the membrane to the substrate.

waterproof roofs

If over time, in construction, the issue of proof was something to keep in mind that of waterproofing roofs was a priority. For waterproofing materials with particular ability to counteract the passage of fluids and in turn, they are able to adapt to different movements of the substrate.

The older material was found and with the properties to solve this problem, was the asphalt. This material has the characteristic of being binding, flexible, highly adhesive, and above all things durable and waterproof. Without doubt, the best is waterproof roofs.

Asphalt is a very noble material, and, through industrialization have improved characteristics and different variants have been obtained which allow for quality waterproofing.

When the problem is specifically waterproofing roofs we can find, in addition, several options to fix it. Certainly, to prevent entry of water into the decks or roofs can resort to different forms, methods or rather, waterproofing systems that provide a real solution.

For waterproofing roofs have the following options: older systems include the waterproofing “in place”, that are made with hot asphalt (asphalt breads melt inside a boiler with heat until the asphalt is in a liquid state) these works are carried out in the same place due to waterproof roofs, so they are called “in place”.

Another system, also “in place”, which is performed with asphalt emulsions (liquid asphalt water-based and application in cold). The work was complemented with the application of various layers overlapping and cross-reviews of fiber or veil of glass sheets. These systems, waterproofing roofs, now little used, also known as seven-layer system.

These are called “dirty systems” and consisting essentially of liquid asphalt manipulate. Then “clean” systems were developed to waterproof roofs, which are currently used more often due to its fast and easy application and therefore lower cost.

Within these systems for waterproofing roofs are: polymerized acrylic paints, synthetic membranes, PVC membranes, polymeric membranes, the asphalt membranes pre-of work performed in the range and the liquid membrane and in cream. Some also serve as a vapor barrier.

The roofs are one of the most important structures of a house, and if there are leaks, the choice is none other than to waterproof roofs. Furthermore, the problems of leaks can cause significant damage to other structures of the house, even the contents of it.

When such problems arise in housing, in many cases, repair tasks usually left to the last minute. But waterproofing roofs to protect homes and prevent headaches later. In this case it will always be cheaper to prevent than to treat the problem when it appears.

When it comes to waterproof roofs or decks and get a “long time” result it is necessary for the task to be performed correctly and without errors, so we recommend that the waterproof roofing is carried out by a professional contractor, the necessary experience and knowledgeable about the latest technology in materials and waterproofing systems.

The product or system most widely used and effective which is used to waterproof roofs is undoubtedly the asphalt waterproofing membrane system which is placed on the surface completely sealing the place creating a really efficient coating that repels water.